STACK100 Pro Powers a VPP-enabled Factory Warehouse in Sydney

The system consists of three battery clusters with 13 battery modules each, paired with a Solis 50 kW high-voltage Hybrid Inverter, demonstrating a practical application of STACK100 Pro in the Australian commercial energy storage market.

Project at a Glance

A Flexible Energy Storage Solution for Commercial Applications

With varying energy demand throughout the day, factory warehouses require flexible and reliable energy storage solutions.

In this project, STACK100 Pro provides 200 kWh of battery storage capacity and integrates with a VPP network, supporting more flexible energy management on site.

Built for Demanding Energy Applications

01 | 1C High-Rate Charging & Discharging

1C charging and discharging enables flexible response to changing energy demands.

02 | IP66 Protection

IP66-rated protection supports reliable operation in demanding environments.

03 | Long Cycle Life

≥8,000 cycles for long-term and frequent energy storage applications.

04 | Wiring-Free, Plug-and-Play

Wiring-free stack-up and plug-and-play design, with one cluster installable in as little as 30 minutes.

05 | Intelligent Energy Management

Intelligent battery management and monitoring for optimized operation and greater system visibility.

Designed for Australia's Evolving Energy Market

With a capacity of 15–921 kWh and Clean Energy Council (CEC) approval, the STACK100 Pro suits applications from residential to small commercial and industrial (C&I). Eligible systems up to 100 kWh can access the federal Cheaper Home Batteries Program, which discounts the first 50 kWh of usable capacity: full rate to 14 kWh, 60% from 14–28 kWh, and 15% from 28–50 kWh. Separately, eligible NSW businesses installing 20 kWh to 30 MWh can access the NSW Batteries for Businesses incentive from 1 September 2026, and eligible systems may be able to claim both.

Estimated A$15,000 in Annual Energy Savings

By integrating Dyness STACK100 Pro into the factory warehouse's energy management system, the project is expected to deliver approximately A$15,000 in annual electricity savings, demonstrating the potential of battery storage to improve energy cost efficiency in commercial applications.

The Riverwood installation demonstrates the real-world application of STACK100 Pro in an Australian commercial environment, combining flexible energy storage with intelligent energy management to support more efficient energy use.